Availability:
4+ in stock
Edelbrock 2182 { Sellable : Yes }
by Edelbrock
SKU ds_BDVJ_2182
Proudly Canadian
Albertan Owned
Secure Payments
Financing Available
Trusted Brands
Top-Quality Suppliers
Original price
$510.80
-
Original price
$510.80
Original price
$510.80
$510.80
$510.80
-
$510.80
Current price
$510.80
Description
Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .448"- Lift @ Valve Exhaust: .472"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 15"
Specifications
| Advertised Exhaust Duration | 280 |
| Advertised Intake Duration | 270 |
| Cam Type | Cast |
| Computer Controlled Compatible | No |
| Description_ABR | Cam Lift kit |
| Description_ASM | Ford:Small-Block Windsor:351 (5.8L) |
| Description_DEF | Engine Camshaft and Lifter Kit |
| Description_DES | CAMSHAFT KIT |
| Description_EXT | Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. |
| Description_FAB | Designed for Optimum Torque and Acceleration |
| Description_FAB | Includes Hydraulic Lifters and Assembly Lube |
| Description_FAB | Major Improvement in Throttle Response and Torque |
| Description_FAB | Matched to Edelbrock Performer Intakes |
| Description_FAB | Maximum Performance From Idle through Mid-Range |
| Description_FAB | Take the Guesswork Out of Camshaft Selection! |
| Description_FAB | Use For Daily Drivers/Trucks/Vans/RVs/4x4s |
| Description_INV | Edelbrock Performer-Plus Camshaft Kit |
| Description_KEY | Edelbrock; Performer; Camshaft; lifters; RV cam; Performer-Plus; Camshaft Kit; Cam and lifter kit; hydraulic lifters; flat tappet; 2182; Ford; small-block; 351W |
| Description_LAB | Edelbrock Performer-Plus camshaft for Small-Block Ford 351W V-8 applications |
| Description_MKT | Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .448" - Lift @ Valve Exhaust: .472" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 15" |
| Description_MKT | Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron cylinder heads on a 351W engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .448"- Lift @ Valve Exhaust: .472"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees- Idle Vacuum @ 1000 RPM's: 15" |
| Description_SHO | { Sellable : Yes } |
| Description_SHP | { eo : 5in.} |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_TRA | In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA | Not for 1985 and later engines with roller lifters. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | Recommended Valve Springs for OEM heads: Edelbrock part #5822 non-rotator/# 5922 Rotator |
| Description_TRA | • Recommended Valve Springs for OEM heads: Edelbrock part # 5822 non-rotator/# 5922 Rotator • Not for 1985 and later engines with roller lifters. • In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. • Oil/additive must contain Zinc designed for use with flat tappet camshafts. • Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. • Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Exhaust Duration at .050 inch Lift | 204 |
| Exhaust Valve Lift | 0.448 |
| Grade Type | Performance |
| height | 3.75 |
| Intake Duration .050 Inch Lift | 204 |
| Intake Valve Lift | 0.472 |
| length | 26.5 |
| Lifter Materials | Hardened Steel |
| Lifter Type | Hydraulic |
| Lobe Separation | 112 |
| LTL | N |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| weight | 15.2 |
| width | 8.0 |
