Availability:
4+ in stock
Edelbrock 3712 { Sellable : Yes }
by Edelbrock
SKU ds_BDVJ_3712
Proudly Canadian
Albertan Owned
Secure Payments
Financing Available
Trusted Brands
Top-Quality Suppliers
Original price
$533.49
-
Original price
$533.49
Original price
$533.49
$533.49
$533.49
-
$533.49
Current price
$533.49
Description
Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .449"- Lift @ Valve Exhaust: .473"- Lobe Separation: 114 Degrees- Intake Centerline: 106 Degrees- Idle Vacuum @ 1000 RPM's: 16"
Specifications
| Advertised Exhaust Duration | 290 |
| Advertised Intake Duration | 280 |
| Cam Type | Cast |
| Computer Controlled Compatible | No |
| Description_ABR | Cam Lift kit |
| Description_ASM | Oldsmobile:Small-Block:350 (5.7L)/403 (6.6L) |
| Description_DEF | Engine Camshaft and Lifter Kit |
| Description_DES | CAMSHAFT KIT |
| Description_EXT | Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. |
| Description_FAB | Designed for Optimum Torque and Acceleration |
| Description_FAB | Includes Hydraulic Lifters and Assembly Lube |
| Description_FAB | Major Improvement in Throttle Response and Torque |
| Description_FAB | Matched to Edelbrock Performer Intakes |
| Description_FAB | Maximum Performance From Idle through Mid-Range |
| Description_FAB | Take the Guesswork Out of Camshaft Selection! |
| Description_FAB | Use For Daily Drivers/Trucks/Vans/RVs/4x4s |
| Description_INV | Edelbrock Performer-Plus Camshaft Kit |
| Description_KEY | Edelbrock; Performer; Camshaft; lifters; RV cam; Performer-Plus; Camshaft Kit; Cam and lifter kit; hydraulic lifters; flat tappet; 3712; Oldsmobile |
| Description_LAB | Performer-Plus Camshaft Kit for Small-Block Oldsmobile 350-403 V8 |
| Description_MKT | Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .449" - Lift @ Valve Exhaust: .473" - Lobe Separation: 114 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16" |
| Description_MKT | Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications:- Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees- Lift @ Valve Intake: .449"- Lift @ Valve Exhaust: .473"- Lobe Separation: 114 Degrees- Intake Centerline: 106 Degrees- Idle Vacuum @ 1000 RPM's: 16" |
| Description_SHO | { Sellable : Yes } |
| Description_SHP | { eo : 5in.} |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_TRA | In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA | May require longer than stock pushrods. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | Recommended Valve Springs for OEM heads: Edelbrock part #5812 |
| Description_TRA | Will not fit 1966 & earlier. |
| Description_TRA | • Recommended Valve Springs for OEM heads: Edelbrock part # 5812 • May require longer than stock pushrods. • Will not fit 1966 earlier. • In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. • Oil/additive must contain Zinc designed for use with flat tappet camshafts. • Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. • Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Engine Make/Size | Olds 307-403 |
| Exh. Duration @ .050 in. (Deg) | 214 |
| Exh. Duration Advertised (Deg) | 290 |
| Exhaust Duration at .050 inch Lift | 204 |
| Exhaust Valve Lift | 0.472 |
| Exhaust Valve Lift | 0.472 in. |
| Grade Type | Performance |
| height | 3.75 |
| Intake Duration .050 Inch Lift | 204 |
| Intake Duration @ 0.050 in. | 204 Degree |
| Intake Duration Advertised | 280 |
| Intake Valve Lift | 0.448 |
| Intake Valve Lift | 0.448 in. |
| length | 26.5 |
| Lifter Materials | Hardened Steel |
| Lifter Type | Hydraulic |
| Lifter Type | Hydraulic Flat Tappet |
| Lobe Separation | 114 |
| LTL | N |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range | 0-6750 |
| Usage | Street/Performance |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| weight | 15.6 |
| width | 8.0 |
