Edelbrock 7110 Edelbrock Street Tunnel Ram Intake Manifold For Chevrolet 302-400 Small-Block V8

Edelbrock part #7110 Street Tunnel Ram intake manifold is designed for 302-327-350-400 c.i.d. small-block Chevy V8's operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified heads. Will not fit 1987 and later cast iron heads. Use with cam kit #5002 for low-end torque or cam kit #7102 for top-end power.

Installation Instructions

Cylinder Head Type	Standard
Description_ABR	Intake Mnfld
Description_ASM	Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Description_DEF	Engine Intake Manifold
Description_DES	INTAKE MANIFOLD
Description_EXT	Edelbrock Street Tunnel Ram Intake Manifold For Chevrolet 302-400 Small-Block V8
Description_FAB	Carburetor Center-To-Center Dimensions = 8.875 in.
Description_FAB	For 3500 to 7500 RPM High-Performance Engines
Description_FAB	For Street Machine/Street Rods/Pro-Street/Marine
Description_FAB	Great For Engines w/Slightly Modified Heads
Description_FAB	HEI Ignition Will Not Clear Manifold
Description_FAB	Top Has Vacuum Outlet for Power Brakes
Description_FAB	Use Where Low-End Torque is Not a Prime Factor
Description_FAB	Will Accept Forward and Sideways Mounted Carbs
Description_INV	Street Tunnel Ram SBC Intake Manifold
Description_KEY	7110; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Single-Plane; Tunnel-Ram; Satin
Description_LAB	Street Tunnel Ram Small Block Chevy Intake Manifold
Description_MKT	Edelbrock part #7110 Street Tunnel Ram intake manifold is designed for 302-327-350-400 c.i.d. small-block Chevy V8's operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified heads. Will not fit 1987 and later cast iron heads. Use with cam kit #5002 for low-end torque or cam kit #7102 for top-end power.
Description_SHO	{ Sellable : Yes }
Description_SHP	{ eo : 8in.}
Description_TRA	Carb pad height: 9.30"
Description_TRA	Carb recommendations: Edelbrock Performer Series #1404 500 cfm, Edelbrock AVS2 Series #1902 500 cfm for Forward mount ONLY. Holley #0-9776 450 cfm for sideways mount ONLY.
Description_TRA	Carburetor size (CFM) should be selected based on your specific engine combination.
Description_TRA	Distance from carb center to carb center: 8.875"
Description_TRA	DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
Description_TRA	H.E.I. ignition will not clear manifold.
Description_TRA	Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Description_TRA	Manifold height (top with bottom): A-9.00", B-9.60"
Description_TRA	Manifold will accept forward and sideways mounted carbs
Description_TRA	NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
Description_TRA	Port exit dimensions: 1.12" x 2.12"
Description_TRA	Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Description_TRA	Recommended intake gasket: Edelbrock #7201.
Description_TRA	Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
Description_TRA	To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.
Description_TRA	Top has vacuum outlet for power brakes
Description_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
Description_TRA	• Top has vacuum outlet for power brakes • Manifold will accept forward and sideways mounted carbs • Carb recommendations: Edelbrock Performer Series # 1404 500 cfm; Edelbrock AVS2 Series # 1902 500 cfm for Forward mount ONLY. Holley # 0-9776 450 cfm for sideways mount ONLY. • Distance from carb center to carb center: 8.875in. • H.E.I. ignition will not clear manifold. • Recommended intake gasket: Edelbrock # 7201. • Manifold height (top with bottom): A-9.00in.; B-9.60in.; Carb pad height: 9.30in. • Port exit dimensions: 1.12in. x 2.12in. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant # 1076; DO NOT USE END SEALS GASKETS. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. • DO NOT OVERTIGHTEN NPT/Pipe fittings; this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread. • Carburetor size (CFM) should be selected based on your specific engine combination. • To ensure maximum performance and a proper seal; Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used. • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Emission	With EGR
Engine Make/Size	Chevy Small Block (262-400)
height	14.0
length	24.25
LTL	N
Number of Carbs	Two
Position	N/A
RPM Range	3500-7500
Usage	Street/Hi-Performance
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
weight	25.85
width	12.25