Edelbrock 7253 Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302

Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302. Is it time to rebuild your Edelbrock mechanical water pump? No problem-- these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications

Installation Instructions

Description_ABR	H2O PMP GSKT
Description_ASM	Ford:Early Small-Block:289 (4.7L)-400 (6.6L)
Description_DEF	Engine Water Pump Gasket
Description_DES	GASKET
Description_EXT	Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302
Description_FAB	Hard Anodized Billet Aluminum
Description_FAB	Manufactured With Quality Materials
Description_INV	Edelbrock Engine Water Pump Gasket #7253
Description_KEY	Water Pump; Water; Pump; 7253; Edelbrock; Gasket; Water pump gasket; ford; 289; 302; kit; set
Description_LAB	Engine Water Pump Gasket Set for Ford 289-302
Description_MKT	Edelbrock #7253 Engine Water Pump Gasket Set Ford 289-302. Is it time to rebuild your Edelbrock mechanical water pump? No problem-- these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications
Description_SHO	{ Sellable : Yes }
Description_SHP	{ eo : 0in.}
Description_TRA	Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft, the adapter bushing is supplied with the unit
Description_TRA	Incorrect alignment or an unbalanced condition puts excessive strain on the pump's shaft and/or bearing and will result in early failure of the shaft and/or bearing
Description_TRA	So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty
Description_TRA	The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft
Description_TRA	The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump
Description_TRA	•Incorrect alignment or an unbalanced condition puts excessive strain on the pump s shaft and/or bearing and will result in early failure of the shaft and/or bearing •The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft •Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4in. pilot hole; so an adapter must be used when installing a water pump with a 5/8in. shaft; the adapter bushing is supplied with the unit •So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty • The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump
height	11.5
length	8.25
LTL	N
Position	N/A
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
weight	0.25
width	0.75