ICON Vehicle Dynamics 65052 05-22 FSD 2.5 PB CENTERLINE STABILIZER KIT

The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.

California Proposition 65	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Description_ASC	TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
Description_ASC	TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
Description_ASC	TECH NOTE: Not compatible with 08-10 or 15-16 F-350 Dually equipped with Wide Track front axle
Description_ASC	TECH NOTE: Not compatible with aftermarket tie rods
Description_ASC	TECH NOTE: Not compatible with F-450/F-550
Description_ASC	TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112, unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
Description_ASM	ICON 05-22 FSD 2.5 PB CENTERLINE STABILIZER KIT
Description_DEF	Steering Damper Kit
Description_DES	05-22 FSD 2.5 PB CENTERLINE STABILIZER KIT
Description_EXT	Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.
Description_FAB	100% bolt-on installation
Description_FAB	5WT shock oil for consistent suspension damping along a wide temperature range
Description_FAB	6061 hard anodized aluminum shock body provides excellent corrosion resistance
Description_FAB	7/8” chrome plated induction-hardened steel shaft
Description_FAB	Drastically increased steering damping over stock unit
Description_FAB	FK Rod End bearings for precise function & feel throughout steering range
Description_FAB	Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
Description_FAB	Offers increased wheel travel compared to ICON's dual steering stabilizer kit
Description_FAB	Piggyback reservoir design
Description_FAB	Provides symmetrical steering feel throughout input range
Description_FAB	Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
Description_INV	65052
Description_MKT	The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.
Description_SHO	STEERING STABILIZER
Description_TRA	ICON 2005-2022 Ford Super Duty 2.5 Piggyback Centerline Stabilizer Kit, 65052
height	6.0
length	27.0
LTL	N
Mounting Bracket Included	yes
Title	ICON 05-22 Ford Super Duty 2.5 Piggyback Centerline Stabilizer Kit
weight	22.0
width	12.0