ICON Vehicle Dynamics K22016 2018-UP JEEP JL 2.5" LIFT STAGE 6 SUSPENSION SYSTEM

The ICON Vehicle Dynamics Stage 6 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 6 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Aluminum Series remote reservoir shocks with vehicle specific valving, tubular steel adjustable front upper links, fixed front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 6 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available.

Description_ASC	APPLICATION NOTE #150: SHOCKS ARE FULLY SERVICEABLE
Description_ASC	APPLICATION NOTE #66: 2 DOOR MODELS SIT SLIGHTLY HIGHER THAN 4 DOOR MODELS BUT REMAIN LEVEL WHEN INSTALLED
Description_ASC	OEM Wheels & Tires Fitment: Yes
Description_ASC	Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22029)
Description_ASC	Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 4.5” Backspace / -6mm Offset
Description_ASC	Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 4.5” Backspace / -12mm Offset
Description_ASC	Ships In Multiple Boxes
Description_ASC	TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
Description_ASC	TECH NOTE: Only compatible with models equipped with 3.6L V6 Pentastar engine. Not compatible with 3.6L V6 eTorque engine.
Description_DEF	Suspension Lift Kit
Description_DES	18-UP JEEP JL 2.5" STAGE 6 SUSPENSION SYSTEM
Description_DES	18-UP JL 2.5" REAR 2.5 VS PB PAIR
Description_DES	18-UP JL 2.5" REAR DUAL RATE SPRING KIT
Description_DES	18-UP JL FRONT ADJ UPPER LINK KIT
Description_DES	18-UP JL REAR ADJ TRACK BAR KIT
Description_DES	18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Description_DES	18-UP JL/20-UP JT FRONT ADJ TRACK BAR KIT
Description_DES	18-UP JL/20-UP JT FRONT FIXED LOWER LINK KIT
Description_DES	20-UP JT/18-UP JL 2.5" FRONT 2.5 VS RR PAIR
Description_EXT	2018-UP JEEP JL 2.5" LIFT STAGE 6 SUSPENSION SYSTEM
Description_FAB	100% bolt-on system makes for an easy install
Description_FAB	2.5 Aluminum Series shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
Description_FAB	2.5" lift height
Description_FAB	3" front, 2" rear increase in wheel travel
Description_FAB	Dual rate coil springs with lifetime guarantee against sagging/breakage
Description_FAB	Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
Description_FAB	Improves on and off-road ride quality over stock
Description_FAB	Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
Description_FAB	“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Description_INV	2018-UP JEEP JL 2.5" STAGE 6 SUSP SYS
Description_MKT	The ICON Vehicle Dynamics Stage 6 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 6 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Aluminum Series remote reservoir shocks with vehicle specific valving, tubular steel adjustable front upper links, fixed front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 6 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available.
Description_SHO	JEEP JL 2.5" STAGE 6
Description_TRA	ICON 2018-Up Jeep JL Wrangler, 2.5" Lift, Stage 6 Suspension System, K22016
height	8.0
length	22.0
LTL	N
weight	143.0
width	13.0