ICON Vehicle Dynamics K93053 2010-2014 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM
Description
Specifications
Add-On Part | 191014 - .25" COLLAR SPANNER PIN WRENCH |
Add-On Part | 198000 - 2 PIN COILOVER SPANNER WRENCH KIT |
Add-On Part | 198001 - BILLET SPANNER WRENCH KIT |
California Proposition 65 | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Description_ASC | APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE |
Description_ASC | APPLICATION NOTE #61: AFTERMARKET EXHAUST MAY NEED TO BE SLIGHTLY MODIFIED FOR USE WITH THIS KIT |
Description_ASC | OEM Wheels & Tires Fitment: Yes |
Description_ASC | Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.625" Backspace / 16mm Offset |
Description_ASC | Ships in multiple boxes |
Description_DEF | Suspension Lift Kit |
Description_DES | 10-14 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
Description_DES | 10-14 RAPTOR FRONT 3.0 VS COILOVER RR CDCV DRVR |
Description_DES | 10-14 RAPTOR FRONT 3.0 VS COILOVER RR CDCV PASS |
Description_DES | 10-14 RAPTOR REAR 3.0 ZETA PB PAIR |
Description_DES | 10-14 RAPTOR REAR AIR BUMP KIT |
Description_DES | 10-20 RAPTOR BILLET UCA DJ KIT |
Description_EXT | 2010-2014 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
Description_FAB | 3.0 OEM Replacement Piggyback Reservoir Zeta 3 Tube Bypass Rear Shocks |
Description_FAB | 3.0 OEM Replacement Remote Reservoir Compression Adjustable Front Coil Over Shocks |
Description_FAB | 6061 Billet Aluminum |
Description_FAB | 6061 Solid billet cross bar that is polished & anodized |
Description_FAB | Adjustable Ride Height from 1 – 3” of Lift |
Description_FAB | Bump stop striker pad does not require leaf spring disassembly |
Description_FAB | Clamshell brackets strengthen frame in critical areas preventing frame damage from extreme off-road use |
Description_FAB | Com 12 PTFE Lined Bearings Ensure Maximum Strength and Durability |
Description_FAB | Comfortable on road manners with sufficient damping capability under extreme load |
Description_FAB | Cross member and tension rods stabilize frame rails and prevent twisting under hard impacts |
Description_FAB | Designed for increased leaf spring clearance so there is no loss in up travel with stock or aftermarket springs |
Description_FAB | Direct Bolt in to OEM Location and Optimum Reservoir Positioning for Superb Heat Dissipation and protection |
Description_FAB | Direct Bolt in to OEM Location with Bypass Adjustment Knobs Easily Accessible for Tuning Adjustment |
Description_FAB | Easily Adjustable on the Vehicle for Perfect Wheel Alignments |
Description_FAB | Easy bolt on installation without having to remove the truck bed |
Description_FAB | Easy-to-Adjust Detented Adjustment Knobs Offer Quick Adjustability without the Use of Tools |
Description_FAB | Easy-to-Adjust High Resolution Compression Adjuster Offers Fine Tuning Adjustments For All Types of Terrains |
Description_FAB | Extended Droop Travel and Increased Overall Performance on and off road |
Description_FAB | High Flow CNC Machined Welded Bypass Blocks designed to Increase Fluid Flow for Enhanced Performance & High Definition Tuning |
Description_FAB | High Precision CNC Machined Pin Provides OEM Like Fitment |
Description_FAB | High Resolution Bypass Valves Designed for Noticeable Fine Tune Adjustments in Rebound and Compression |
Description_FAB | Hydro-pneumatic bump stop increases bump energy capacity |
Description_FAB | ICON Engineered Eibach 3 5/8” ID High Quality Chrome Silicon Steel Springs that offer increased travel and performance |
Description_FAB | Increases frame rigidity and improves overall vehicle dynamics |
Description_FAB | Industry first billet cross beam |
Description_FAB | Integrated adjustability for future ICON Raptor specific products |
Description_FAB | Internal Hydraulic Bump Zone Designed for Maximum G-out Control in the Last 40% of Travel |
Description_FAB | Key Features of Hydraulic Bump Stop System: |
Description_FAB | Key Features of the Raptor Front 3.0 Coil Over Shock: |
Description_FAB | Key Features of the Raptor Rear 3.0 Bypass Shock: |
Description_FAB | Key Features of the Raptor Upper Control Arms: |
Description_FAB | Multi Stage Cad Plated Finish with Polished and Anodized Top Cap / Rod Ends |
Description_FAB | Nitrogen Charged 6063-T832 Aluminum 10” Remote Reservoirs that are Precision CNC Honed & Hard Anodized |
Description_FAB | O-ring sealed billet dust cover |
Description_FAB | Oversized 1” Heavy Duty CNC Machined Shock Shafts |
Description_FAB | Patented Delta Joint (U.S. Patent No. 10,731,700) |
Description_FAB | Pre-tuned and Nitrogen charged for most Ford Raptors |
Description_FAB | Precision CNC Machined |
Description_FAB | Reduces rear end kick and improves overall performance |
Description_FAB | Replaceable Bypass Tubes That Can Easy Slide in to Position if you were to Dent or Damage One |
Description_FAB | RSMX PTFE Lined 7/8” Rod Ends |
Description_FAB | Special Engineered Dampened Valve Stops for Quiet and Precise Operation without the Standard Bypass Loud “Clicking” Noise you will find with Other Brands |
Description_FAB | UHMH Machined Shaft & Rod End Protective Shin Guards Standard with Every Kit |
Description_FAB | Velocity sensitive hydraulic bump stop increases the amount of energy absorbed the faster it is hit |
Description_INV | 10-14 FORD RAPTOR STG 3 SUSP SYS |
Description_MKT | Considering the capability of our high performance 3.0 shocks, many Raptor owners are still using their vehicles beyond Fords intended design requiring further performance upgrades. These trucks are often loaded with additional weight, which when combined, results in VERY high suspension impact speeds. The factory rear bump stop is made of foam rubber and is limited on how much energy it can absorb. Ford Raptors have a couple of unique issues that are problematic for proper control of bump stop forces. The factory rear bump stops are mounted in a manner that allows for the rubber to squish out to the side of its mount, allowing metal to metal contact. The frame surrounding the OEM bump stop mount is not capable of these kinds of forces and with repeated abuse can lead to frame damage not covered by warranty. A more robust solution is a hydro-pneumatic bump shock or "air bump". |
Description_MKT | ICON Vehicle Dynamics is known for its extensive research and development put into every product, the revolutionary outcome of this research is what sets ICON apart from the off-road industry standard. The Ford SVT Raptor was the first production truck, designed & built, to bridge the gap between a standard street “pickup truck” and an off-road pre-runner. ICON Vehicle Dynamics new 3.0 Performance Shock System w/ Delta Joint Upper Control Arms for the SVT Raptor went through rigorous tests both on- and off-road for several months to enhance the overall performance and ride quality. |
Description_MKT | ICON's hydraulic bump stop uses oil and nitrogen to do two tasks: function as a spring and a shock. An internal nitrogen charge is compressed when the air bump is compressed to act as a spring, similar to the OEM bump stop. The difference is hydraulic air bumps are adjustable and can be tuned to have low impact forces at the beginning of the travel, and ramp theoretically to infinity at the end. Unlike the factory bump stop, ICON's hydraulic bump stop incorporates oil along with a damping piston internally to control the amount of energy that is returned to the suspension, reducing the vehicles tendency to kick. The oil and damping piston also control the compression of the air bump relative to speed which is important for Raptors hitting obstacles at extreme speeds. Our resulting dynamic system is one that is soft and compliant allowing full suspension travel at slow speeds, yet at high speeds will create very high forces to resist bottoming out. ICON's Ford Raptor hydraulic bump stop system uses a 2.5" travel air bump allowing the shock additional distance to control energy, and does not interfere with suspension travel under normal driving conditions. The clamshell bracket design with triangulated cross braces not only gives a rigid mounting point for the air bump, it helps support a known weak part of the frame prone to failure. |
Description_MKT | Our Rear Zeta Ford SVT Raptor Shocks are a true 3.0” (inside and out), three tube External Bypass shock. These are far from the norm when compared to a traditional bypass shock you see on Trophy Trucks and other off-road race vehicles. Each bypass valve has a specific port design and individually equipped with a different spring rate to ensure proper performance at each zone of shock travel. These same bypass valves feature dampened valve stops for quiet and precise operation. That means no clicking noises as you hit bumps or road chatter driving down the road. The biggest difference in these shocks versus an industry standard bypass shock, are the “Easy-to-Adjust” knobs and the replaceable bypass tubes. The “Easy to Adjust” Hi Resolution Clicker Knobs do not require any tools for adjustment, and can be adjusted in seconds from plush off-road performance to firm on road manners for extra control while driving the mountains or towing a trailer. Another unique feature of this shock is the replaceable bypass tubes that can be swapped out during a standard rebuild if any damage were to occur, where a normal bypass shock body would need to be completely replaced, saving you hundreds of dollars. |
Description_MKT | The engineers at ICON Vehicle Dynamics took a different approach to position sensitive performance in our 3.0 front coil over shock. Instead of bypassing a small internal piston at the cost of poor control, road holding, and cornering like a traditional internal position sensitive shock, our shock starts with a true 3” main piston that has robust features such as digressive rebound and flutter stack compression. This combination produces outstanding control, great response, and unparalleled ride performance. To achieve even more control for extreme off-road use, we added an additional internal hydraulic system (much like an external mounted hydraulic bump stop) that produces the extreme forces required during the last 40% of travel to achieve maximum bottom out control. These multiple stages of compression and rebound have been tuned independently to maximize overall performance of the Ford SVT Raptor front suspension. For owners who wish to optimize the ride specific to his or her liking, the front coil-over shocks are equipped with an external, “Easy to Adjust” Compression Damping Control Valve, that is effective for the entire stroke of the shock. This compression adjustment valve offers you 10 high resolution settings, each bringing a true feel difference from soft to firm. |
Description_MKT | This Stage 3 System combines the unstoppable performance of our Ford Raptor 3.0 Performance Shock System & hydraulic bump stop system while including our fully adjustable Billet Delta Joint Upper Control Arms. These trucks were designed with off road performance in mind but the factory upper arm with ball joint is one of the weak points in the factory Raptor suspension. Unique to no other Raptor Upper Control Arm on the market to have on-vehicle adjustable rod ends to allow for easy alignment adjustment in minutes not hours. That means no taking the arms on and off to adjust them you simply loosen the pinch bolts, adjust to your liking, and re-tighten the pinch bolts. The adjustability allows you to retain the factory track width, while improving tire clearance between the tire and back side of the front fender well. |
Description_MKT | This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. |
Description_SHO | SUSPENSION SYSTEM |
Description_TRA | ICON 2010-2014 Ford Raptor, Stage 3 Suspension System, K93053 |
height | 8.0 |
length | 38.0 |
LTL | N |
Title | 10-14 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
weight | 259.0 |
width | 10.0 |
Fitment
Reviews
Looks like no one's left a review for this product yet!
Refund Policy
Cancellations and Refunds
At Truck Part Superstore, we understand that sometimes plans change. We're here to help you navigate through our cancellation and refund policies in a way that's clear and fair.
Returns
Process: Complete our online return form here for a smooth process. Note that items returned without following this process may not be credited. Traceability is imperative.
Warranty Issues: Contact the manufacturer first for warranty issues like internal damage or missing parts.
Non-Returnable Items: Certain items, such as used/installed parts, electrical components, and clearance items, may not be returnable.
Costs: We may withhold shipping costs and restocking fees from your refund, with exceptions for incorrect or damaged items.
Shipping Damage: Document any damage upon arrival for claims. Minor damage on large freight items will be evaluated case by case. Freight claims are arbitrated by the couriers, not by TPS.
Return Rejection: In cases where shipping costs exceeds 50% of the product value, returns may be automatically rejected. If you'd like to proceed with that in mind, we will require your approval.
Product Fitment: It’s your responsibility to ensure the product fits your needs. Our team is here to assist you with any queries before purchasing.
Return Deadline: We reserve the right to deny returns 30 days post-shipment.
Refunds
Processing Time: Allow us 2 weeks to receive and inspect your return. Post-inspection, we’ll update you on the return resolution.
Refund Timeline: Expect the refund within 7-10 business days post-resolution. Exchanges, if applicable, will be processed then.
Exchanges
Criteria: Exchanges are available for identical products in cases of shipping damage, incorrect item received per order, and some manufacturer warranty claims.
Process: We’ll ship the replacement once the damaged item is returned and inspected. For urgent replacements, consider opting for a refund and placing a new order.
Shipping for Returns
Follow the return process outlined on our website for a hassle-free experience. Remember, incomplete or inaccurate return documentation might affect your credit or slow down the process.
Cancellations - In-Stock Items
- Timing Matters: You can cancel your order of in-stock items anytime before it's got a label on it. We'll do our best to process your cancellation request swiftly, but please understand that sometimes there might be delays due to coordination between our customer service and warehouse teams. It is also possible that items will not be scanned until they're at a courier's depot, so just because tracking isn't updated, doesn't mean an item isn't already out the door.
- Restocking Fee: A minimal fee of 5% applies for cancellations, to cover administrative and processing costs. We believe in giving you choices, so you can also opt for a full store credit instead.
- Order Fulfillment: Once your order has a shipping label on it, we consider it fulfilled and it can't be cancelled. However, you're welcome to return the items once you receive them, with the shipping costs covered by you.
- Pro Tip: We recommend checking all details of your purchase before finalizing it to avoid any unnecessary costs.
Cancellations - Backorder/Special Order
- Backorders & Special-Orders: For cancellations within 90 days from the purchase date, a 25% restocking fee is applied to cover surplus inventory and administrative costs. Beyond 90 days, a lower fee of 5% is applicable. Alternatively, we offer full store credit or the option to switch to a different item.
- Non-Cancellable Items: Once special order items have shipped from the manufacturer, they cannot be cancelled.
- Dispute Resolution: In case of payment disputes or chargebacks, we reserve the right to involve collections agents and credit bureaus. Disputing a payment does not cancel your order - it is simply a default on payment for purchase contract. If you'd like to cancel, please contact us.
- Shipment Refusal: If you refuse a fulfilled order, we'll refund the cost minus shipping both ways and any applicable restocking fees (except for special order items which are non-returnable).
Please Note: For availability queries when not listed on product page, contact us before purchasing to avoid disappointments and cancellation fees.
Definitions and Clarifications:
- Backordered Items: Out-of-stock products typically stocked by us.
- Special Order Items: Products not regularly stocked due to various options or limited demand.
Delivery Estimates:
- We provide ETA updates on request but can't guarantee delivery dates for special or backordered items. There are many variables at play when it comes to international procurement.
We’re here to make your shopping experience with us as seamless as possible. For any questions or assistance, feel free to reach out to our dedicated team at sales@truckpartsuperstore.ca
Shipping Policy
Shipping Policy at Truck Part Superstore
We're dedicated to ensuring your shopping experience with us is smooth and transparent, especially when it comes to shipping your orders.
Free Shipping
- General Policy: Most orders at Truck Part Superstore enjoy free Economy Ground shipping. We strive to keep shipping simple and straightforward for you.
- Special Circumstances: For orders over 150lbs, oversized dimensions, or those heading to remote areas (like Yukon, NWT, Nunavut, and the Maritimes), additional fees may apply due to special freight requirements.
- Informed Choices: If you're ordering an oversized item or shipping to a remote area, our product pages and checkout process will let you know in most cases.
- Cancellation Policy: Should you choose to cancel an order with pre-informed freight charges, a nominal 5% fee will be applied to cover transaction and administrative costs.
- Delivery Recommendations: We suggest having your package delivered to a location where someone can receive it during business hours. Carriers may leave packages unattended. If this is a concern for you, we recommend choosing Insured shipping at checkout. For lost packages reported within 12 hours of delivery and insured, we'll replace it at no charge (limited to one replacement per order). All we ask is that you file a formal police report for the package theft and share that with us.
Special Orders and Backorders: Free shipping does not cover inbound freight for special orders. Out-of-stock items are placed on standard backorder by default and will arrive with our next stock shipment from the manufacturer. Inbound freight is an optional cost which we are happy to quote for you should you wish to expedite.
PO Box Addresses
- Delivery Restrictions: Our products cannot be shipped to P.O. Boxes. Entering a P.O. Box may delay your order, and any courier address correction fees will be passed on to you.
- Alternative Solutions: If you only have a P.O. Box, we can explore other delivery options like shipping to a nearby courier station. Please contact us for personalized assistance.
Order Processing
- Efficient System: Our system automatically processes your orders, ensuring in-stock items are shipped promptly based on the lead time indicated on the product page. For backordered items, we add them to our purchase orders by manufacturer, shipping them out as soon as they arrive.
Core Charges
- Applicable Items: For items with core charges, this will be added to your order. Follow the manufacturer’s instructions for core return, and we'll credit you once it's processed. For updates on core credits, please contact the manufacturer directly.
Estimated Lead Times & Shipping Dates
- Best Effort Estimates: We provide estimated lead times for in-stock items, but please note these are not guarantees. Factors like courier service variations, inventory transfers, and staffing can affect shipping times. The same applies to backordered items, where we depend on manufacturer information and their shipping schedules.
Remember, we're always here to assist you with any queries or concerns about your order’s shipping and handling. Your satisfaction is our top priority at Truck Part Superstore!