ICON Vehicle Dynamics K93153 2017-2020 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM
Description
Specifications
Add-On Part | 191014 - .25" COLLAR SPANNER PIN WRENCH |
Add-On Part | 198000 - 2 PIN COILOVER SPANNER WRENCH KIT |
Add-On Part | 198001 - BILLET SPANNER WRENCH KIT |
Add-On Part | 95199 - 19-20 RAPTOR DAMPER INTERFACE DEVICE |
California Proposition 65 | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Description_ASC | APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE |
Description_ASC | OEM Wheels & Tires Fitment: Yes |
Description_ASC | Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset |
Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.625" Backspace / 16mm Offset |
Description_ASC | Ships in multiple boxes |
Description_ASC | TECH NOTE: 2019-2020 VEHICLES WITH FACTORY LIVE VALVE SHOCKS WILL NEED AN ICON DAMPER INTERFACE DEVICE (PN: 95199) TO ALLOW THE VEHICLE DRIVE MODES TO OPERATE CORRECTLY WITH THE OE SHOCKS REMOVED. |
Description_DEF | Suspension Lift Kit |
Description_DES | 10-20 RAPTOR BILLET UCA DJ KIT |
Description_DES | 17-20 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
Description_DES | 17-20 RAPTOR FRONT 3.0 VS RR CDCV COILOVER KIT |
Description_DES | 17-20 RAPTOR MULTI RATE LEAF PACK W/ ADD IN LEAF |
Description_DES | 17-20 RAPTOR MULTI RATE LEAF SPRING HARDWARE KIT |
Description_DES | 17-20 RAPTOR REAR 3.0 PB PAIR |
Description_DES | 17-20 RAPTOR REAR BUMP SPACER KIT |
Description_EXT | 2017-2020 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
Description_FAB | 10" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping |
Description_FAB | 12" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping |
Description_FAB | 3 user-adjustable spring rates for unique vehicle setups |
Description_FAB | 3-tube bypass design and "Bump Zone" technology provides multiple unique zones of damping and rebound control |
Description_FAB | 3.0 SERIES 3-TUBE BYPASS SHOCK KIT |
Description_FAB | 3.0 SERIES COILOVER SHOCK KIT |
Description_FAB | 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions |
Description_FAB | Adjustable coilovers yield 1-3” of front lift height |
Description_FAB | Barreled coil spring design maximizes travel and provides more efficient packaging |
Description_FAB | BILLET ALUMINUM UPPER CONTROL ARM KIT |
Description_FAB | Bolt-in design makes for an easy install into OEM shock location |
Description_FAB | Built in o-ring sealed dust cover cap |
Description_FAB | Built-in caster correction improves front end geometry |
Description_FAB | CAD plated shock body with hard anodized piston and top cap |
Description_FAB | Camber and caster adjustability allows for precise wheel alignment |
Description_FAB | CNC machined 6061 billet aluminum construction for light weight and exceptional strength |
Description_FAB | Direct bolt-in to OEM spring location makes for an easy install |
Description_FAB | Easy-to-adjust detented knobs offer quick adjustability without the use of tools |
Description_FAB | Easy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups |
Description_FAB | FK Rod End COM12 spherical bearings ensure maximum strength and durability |
Description_FAB | Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life |
Description_FAB | Heavy duty CNC machined 1” shock shafts |
Description_FAB | High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage |
Description_FAB | ICON double adjuster sleeves for easy on-vehicle adjustment |
Description_FAB | ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel |
Description_FAB | Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use |
Description_FAB | Leaf separators and tip inserts reduce noise and friction while increasing ride comfort |
Description_FAB | MULTI-RATE LEAF SPRING KIT |
Description_FAB | Offset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging |
Description_FAB | Patented Delta Joint (U.S. Patent No. 10,731,700) for maximum durability and noise-free operation |
Description_FAB | PTFE Lined 7/8” FK Rod Ends increase rigidity and improve response |
Description_FAB | Rebound leaf reduces severe axle wrap |
Description_FAB | Specially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands |
Description_FAB | Superior low speed control reduces body roll and increases on-road stability |
Description_FAB | Triple military wrap front eyelet and rear half wrap for increased durability |
Description_FAB | Urethane shin guards help to protect the shock shaft & rod end from premature wear |
Description_FAB | Vehicle specific taper pin provides OE-like fitment |
Description_FAB | “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability |
Description_INV | 17-20 FORD RAPTOR STAGE 3 SUSP SYSTEM |
Description_MKT | After hundreds of hours of R&D and thousands of miles of real world on and off-road testing, ICON engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-2020 Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical ICON fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance “needs and wants”. After this process, the ICON engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R&D. |
Description_MKT | Holistic Engineering - the ICON Difference When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up. |
Description_MKT | ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-2020 Ford F150 Raptor. |
Description_MKT | ICON's billet aluminum upper control arms are designed with built-in caster correction for predictable handling and feature on-vehicle camber/caster adjustment for precise vehicle alignment. These upper control arms include ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. |
Description_MKT | The front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. |
Description_MKT | The rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R&D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions. |
Description_MKT | To compliment ICON's rear 3.0 Series bypass shocks, ICON engineers decided to scrap the OE rear leaf springs and develop a replacement that addressed a couple issues found in the R&D process. The result is a user-adjustable, multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles. The resulting spring pack produces a ride that is much smoother in all terrain, significantly reduces axle wrap, while also adding durability and strength. |
Description_SHO | STAGE 3 SUSP SYSTEM |
Description_TRA | ICON 2017-2020 Ford Raptor, 1-3" Lift, 3.0, Stage 3 Suspension System, K93153 |
height | 18.0 |
length | 18.0 |
LTL | N |
Title | 17-20 FORD RAPTOR STAGE 3 SUSPENSION SYSTEM |
weight | 340.0 |
width | 48.0 |
Fitment
Reviews
Looks like no one's left a review for this product yet!
Refund Policy
Cancellations and Refunds
At Truck Part Superstore, we understand that sometimes plans change. We're here to help you navigate through our cancellation and refund policies in a way that's clear and fair.
Returns
Process: Complete our online return form here for a smooth process. Note that items returned without following this process may not be credited. Traceability is imperative.
Warranty Issues: Contact the manufacturer first for warranty issues like internal damage or missing parts.
Non-Returnable Items: Certain items, such as used/installed parts, electrical components, and clearance items, may not be returnable.
Costs: We may withhold shipping costs and restocking fees from your refund, with exceptions for incorrect or damaged items.
Shipping Damage: Document any damage upon arrival for claims. Minor damage on large freight items will be evaluated case by case. Freight claims are arbitrated by the couriers, not by TPS.
Return Rejection: In cases where shipping costs exceeds 50% of the product value, returns may be automatically rejected. If you'd like to proceed with that in mind, we will require your approval.
Product Fitment: It’s your responsibility to ensure the product fits your needs. Our team is here to assist you with any queries before purchasing.
Return Deadline: We reserve the right to deny returns 30 days post-shipment.
Refunds
Processing Time: Allow us 2 weeks to receive and inspect your return. Post-inspection, we’ll update you on the return resolution.
Refund Timeline: Expect the refund within 7-10 business days post-resolution. Exchanges, if applicable, will be processed then.
Exchanges
Criteria: Exchanges are available for identical products in cases of shipping damage, incorrect item received per order, and some manufacturer warranty claims.
Process: We’ll ship the replacement once the damaged item is returned and inspected. For urgent replacements, consider opting for a refund and placing a new order.
Shipping for Returns
Follow the return process outlined on our website for a hassle-free experience. Remember, incomplete or inaccurate return documentation might affect your credit or slow down the process.
Cancellations - In-Stock Items
- Timing Matters: You can cancel your order of in-stock items anytime before it's got a label on it. We'll do our best to process your cancellation request swiftly, but please understand that sometimes there might be delays due to coordination between our customer service and warehouse teams. It is also possible that items will not be scanned until they're at a courier's depot, so just because tracking isn't updated, doesn't mean an item isn't already out the door.
- Restocking Fee: A minimal fee of 5% applies for cancellations, to cover administrative and processing costs. We believe in giving you choices, so you can also opt for a full store credit instead.
- Order Fulfillment: Once your order has a shipping label on it, we consider it fulfilled and it can't be cancelled. However, you're welcome to return the items once you receive them, with the shipping costs covered by you.
- Pro Tip: We recommend checking all details of your purchase before finalizing it to avoid any unnecessary costs.
Cancellations - Backorder/Special Order
- Backorders & Special-Orders: For cancellations within 90 days from the purchase date, a 25% restocking fee is applied to cover surplus inventory and administrative costs. Beyond 90 days, a lower fee of 5% is applicable. Alternatively, we offer full store credit or the option to switch to a different item.
- Non-Cancellable Items: Once special order items have shipped from the manufacturer, they cannot be cancelled.
- Dispute Resolution: In case of payment disputes or chargebacks, we reserve the right to involve collections agents and credit bureaus. Disputing a payment does not cancel your order - it is simply a default on payment for purchase contract. If you'd like to cancel, please contact us.
- Shipment Refusal: If you refuse a fulfilled order, we'll refund the cost minus shipping both ways and any applicable restocking fees (except for special order items which are non-returnable).
Please Note: For availability queries when not listed on product page, contact us before purchasing to avoid disappointments and cancellation fees.
Definitions and Clarifications:
- Backordered Items: Out-of-stock products typically stocked by us.
- Special Order Items: Products not regularly stocked due to various options or limited demand.
Delivery Estimates:
- We provide ETA updates on request but can't guarantee delivery dates for special or backordered items. There are many variables at play when it comes to international procurement.
We’re here to make your shopping experience with us as seamless as possible. For any questions or assistance, feel free to reach out to our dedicated team at sales@truckpartsuperstore.ca
Shipping Policy
Shipping Policy at Truck Part Superstore
We're dedicated to ensuring your shopping experience with us is smooth and transparent, especially when it comes to shipping your orders.
Free Shipping
- General Policy: Most orders at Truck Part Superstore enjoy free Economy Ground shipping. We strive to keep shipping simple and straightforward for you.
- Special Circumstances: For orders over 150lbs, oversized dimensions, or those heading to remote areas (like Yukon, NWT, Nunavut, and the Maritimes), additional fees may apply due to special freight requirements.
- Informed Choices: If you're ordering an oversized item or shipping to a remote area, our product pages and checkout process will let you know in most cases.
- Cancellation Policy: Should you choose to cancel an order with pre-informed freight charges, a nominal 5% fee will be applied to cover transaction and administrative costs.
- Delivery Recommendations: We suggest having your package delivered to a location where someone can receive it during business hours. Carriers may leave packages unattended. If this is a concern for you, we recommend choosing Insured shipping at checkout. For lost packages reported within 12 hours of delivery and insured, we'll replace it at no charge (limited to one replacement per order). All we ask is that you file a formal police report for the package theft and share that with us.
Special Orders and Backorders: Free shipping does not cover inbound freight for special orders. Out-of-stock items are placed on standard backorder by default and will arrive with our next stock shipment from the manufacturer. Inbound freight is an optional cost which we are happy to quote for you should you wish to expedite.
PO Box Addresses
- Delivery Restrictions: Our products cannot be shipped to P.O. Boxes. Entering a P.O. Box may delay your order, and any courier address correction fees will be passed on to you.
- Alternative Solutions: If you only have a P.O. Box, we can explore other delivery options like shipping to a nearby courier station. Please contact us for personalized assistance.
Order Processing
- Efficient System: Our system automatically processes your orders, ensuring in-stock items are shipped promptly based on the lead time indicated on the product page. For backordered items, we add them to our purchase orders by manufacturer, shipping them out as soon as they arrive.
Core Charges
- Applicable Items: For items with core charges, this will be added to your order. Follow the manufacturer’s instructions for core return, and we'll credit you once it's processed. For updates on core credits, please contact the manufacturer directly.
Estimated Lead Times & Shipping Dates
- Best Effort Estimates: We provide estimated lead times for in-stock items, but please note these are not guarantees. Factors like courier service variations, inventory transfers, and staffing can affect shipping times. The same applies to backordered items, where we depend on manufacturer information and their shipping schedules.
Remember, we're always here to assist you with any queries or concerns about your order’s shipping and handling. Your satisfaction is our top priority at Truck Part Superstore!