Edelbrock 7121 Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8

Edelbrock part #7121 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.

Installation Instructions

Basic Operating RPM Range	1500-6500
Center Maximum Height	4.900
CNC Ported	No
Cylinder Head Type	Standard
Description_ABR	Intake Mnfld
Description_ASM	Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)
Description_DEF	Engine Intake Manifold
Description_DES	INTAKE MANIFOLD
Description_EXT	Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8
Description_FAB	Best for the Ultimate in Street High-Performance
Description_FAB	Designed for 1500 to 6500 RPM Street-Driven Power
Description_FAB	Dual-Plane High-Rise Intake w/180 Deg. Firing Order
Description_FAB	Larger Plenum and Runners Maximizes Other Upgrades
Description_FAB	Produces Incredible Top-End Horsepower
Description_FAB	Retains Good Throttle Response and Acceleration
Description_INV	RPM SBF 8.2 Deck Intake Manifold
Description_KEY	7121; Ford; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer RPM; Satin
Description_LAB	Performer RPM Ford Small Block 302 Intake Manifold
Description_MKT	Edelbrock part #7121 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Description_SHO	{ Sellable : Yes }
Description_SHP	{ eo : 9in.}
Description_TRA	Carb pad height: 4.90"
Description_TRA	Carb recommendations: Edelbrock AVS2 or Performer Series 600-750 cfm.
Description_TRA	Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Description_TRA	Manifold Height: A-4.30", B-5.50"
Description_TRA	Port exit dimensions: 1.05" x 1.86"
Description_TRA	Recommended intake gasket: Edelbrock #7220.
Description_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
Description_TRA	Will not fit 255 c.i.d. V8.
Description_TRA	• Will not fit 255 c.i.d. V8. • Recommended intake gasket: Edelbrock # 7220. • Manifold Height: A-4.30in.; B-5.50in. • Carb pad height: 4.90in. •Carb recommendations: Edelbrock AVS2 or Performer Series 600-750 cfm. • Port exit dimensions: 1.05in. x 1.86in. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant #1076; DO NOT USE END SEALS GASKETS. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
EGR Port	No
Emission	Without EGR
Engine Make/Size	Ford 260-302
finish	Satin
Flange Type	4150
Front Maximum Height	4.300
Gasket Or Seal Included	No
Grade Type	Performance
height	5.75
length	22.25
LTL	N
Material	Aluminum
Number of Carbs	One
Position	N/A
Rear Maximum Height	5.500
RGL	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range	1500-6500
Series	Performer RPM
Single Or Dual Plane Type	Dual
Usage	Street/Hi-Performance
Vehicle Model	Ford
WARNING CA Proposition 65	Yes
WARNING CA Proposition 65 Message	WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
weight	18.2
width	10.25