Rough Country 69050 3.5 Inch Jeep Suspension Lift Kit Vertex Reservoir Stage 2 Coils & Control Arm Drop 18-20 Wrangler JL Unlimited Rubicon Rough Country
SKU ds_DHTP_69050
Availability:
Out of stock
Sold out
Original price
$2,728.81
-
Original price
$2,728.81
Original price
$2,728.81
$2,728.81
$2,728.81
-
$2,728.81
Current price
$2,728.81
Description
Jeep's JL Wrangler model is an impressive overhaul over previous designs, with modern appointments and considerably more power. Put the finishing touch on your new JL with enough clearance to easily run 35x12.50 tires with Rough Country's 3.5in Suspension Lift!
This easy-to-install kit offers a total transformation in the look of your Jeep while maintaining a smooth, factory-like ride. Instantly gain an aggressive look and commanding stance that will truly set your JL apart from the pack!
Rough Country's 3.5in Suspension Lift includes front and rear coil springs with a linear coil rate that promotes incredible handling while retaining more lift height under load than other designs! For an impressive ride quality both on and off-road, this kit also includes Rough Country's Adjustable Vertex Reservoir shocks.
These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance. A set of control arm drop brackets allow you to retain the factory arms at the proper geometric angle for great handling and a smooth highway ride.
Better still, this kit features sway-bar links, bump stops and a front, adjustable forged track bar which helps keep your axles tame even under demanding off-road action and is easy to adjust on the vehicle. Jeep JL models lifted 3.5 inch or taller are prone to driveshaft damage at full suspension droop.
The factory shaft Does Not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's Stage 2 Kit includes an aftermarket front CV driveshaft to eliminate this issue and allows you to take advantage of the full travel potential of your lifted Jeep JL!
Rough Country's Jeep JL 3.5in kit features an easy installation process with Onlylight drilling Required for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind!
Features:
- Easy Installation
- Increased Ground Clearance
- Includes upgraded CV Front Driveshaft
- Great handling and smooth ride quality
- Includes a Forged Adjustable Track Bar
Notes:
- Fits 4-Door models Only
- Does Not fit Rubicon models
Details:
- Sold As Kit
- Doors 4 Door
- Drive 4WD
- Tire Info 35x12.50 R20:20x10:-:-18
- Max Tire 35.0 inch
- Lift Height 3.5 inch
- Front Components Lifted Coil Springs Adjustable Track Bar CV Dana 30 Front Driveshaft Side Control Arm Drop Brackets Sway Bar Links Bump Stops
- Rear Components Lifted Coil Springs Sway Bar Links Track Bar Bracket Bump Stops
Resources
Installation InstructionsSpecifications
| brand_logo | https://www.asapnetwork.org/sites/default/files/brands/icons/rough%20country%20asap.jpg |
| Description_ASC | 2018-2021:4WD:Jeep:Wrangler JL Unlimited |
| Description_ASC | Fits 4-Door models ONLY |
| Description_ASC | Fits 4-Door models ONLY Does NOT fit Rubicon models |
| Description_ASM | 2018-2020:4WD:Jeep:Wrangler JL Unlimited Rubicon |
| Description_ASM | 2018-2022:4WD:Jeep:Wrangler JL Unlimited |
| Description_ASM | 2018-2023:4WD:Jeep:Wrangler JL Unlimited |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 3.5in Jeep Susp Lft Kt, Stg 2 Coils&Cntrl Arm Drp (18-20 Wrnglr JL Unlmtd Rubi.) |
| Description_DES | Suspension Lift Kit |
| Description_EXT | 3.5" Lift Kit - C/A Drop - FR D/S - Vertex - Jeep Wrangler JL Rubicon (18-23) |
| Description_EXT | Suspension Lift Kit; 3.5 ; Adjustable Lower Control Arms; Front/Rear Coil Springs; w/Linear Coil Rate; Nitrogen Charged; N3 Shocks; Forged Adjustable Track Bar; |
| Description_FAB | Easy Installation |
| Description_FAB | Great Handling And Smooth Ride Quality |
| Description_FAB | Includes A Forged Adjustable Track Bar |
| Description_FAB | Includes Upgraded CV Front Driveshaft |
| Description_FAB | Increased Ground Clearance |
| Description_INV | Rough Country-Suspension Lift Kit |
| Description_MKT | Jeep's JL Wrangler model is an impressive overhaul over previous designs, w/ modern appointments & considerably more power. Put the finishing touch on your new JL w/ enough clearance to easily run 35x12.50 tires w/ Rough Country's 3.5in Suspension Lift! This easy-to-install kit offers a total transformation in the look of your Jeep while maintaining a smooth, factory-like ride. Instantly gain an aggressive look & comm&ing stance that will truly set your JL apart from the pack!Rough Country's 3.5in Suspension Lift includes front & rear coil springs w/ a linear coil rate that promotes incredible h&ling while retaining more lift height under load than other designs! For an impressive ride quality both on & off-road, this kit also includes Rough Country's Adjustable Vertex Reservoir shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, & reinforced seals for a long lifespan of smooth performance. A set of control arm drop brackets allow you to retain the factory arms at the proper geometric angle for great h&ling & a smooth highway ride. Better still, this kit features sway-bar links, bump stops & a front, adjustable forged track bar which helps keep your axles tame even under dem&ing off-road action & is easy to adjust on the vehicle.Jeep JL models lifted 3.5 in or taller are prone to driveshaft damage at full suspension droop. The factory shaft does not have adequate clearance once lifted & will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's Stage 2 Kit includes an aftermarket front CV driveshaft to eliminate this issue & allows you to take advantage of the full travel potential of your lifted Jeep JL! Rough Country's Jeep JL 3.5in kit features an easy installation process w/ only light drilling required for an easy, no-fuss assembly & includes a Lifetime Replacement Warranty for the ultimate peace of mind! |
| Description_MKT | Jeep's JL Wrangler model is an impressive overhaul over previous designs, with modern appointments and considerably more power. Put the finishing touch on your new JL with enough clearance to easily run 35x12.50 tires with Rough Country's 3.5in Suspension Lift! This kit offers a total transformation in the look of your Jeep while maintaining a smooth, factory-like ride. Instantly gain an aggressive look and commanding stance that will truly set your JL apart! Rough Country's 3.5in Suspension Lift includes front and rear coil springs with a linear coil rate that promotes incredible handling while retaining more lift height under load than other designs! For an impressive ride quality both on and off-road, this kit also includes Rough Country's Adjustable Vertex Reservoir shocks. 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance. Control arm drop brackets allow you to retain the factory arms at the proper geometric angle for great handling and a smooth highway ride. Better still, this kit features sway-bar links, bump stops and a front, adjustable forged track bar which helps keep your axles tame even under demanding off-road action and is easy to adjust on the vehicle. Jeep JL models lifted 3.5in or taller are prone to driveshaft damage at full suspension droop. The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's Stage 2 Kit includes an aftermarket front CV driveshaft to eliminate this issue and allows you to take advantage of the full travel potential of your lifted Jeep JL! Rough Country's Jeep JL 3.5in kit features an easy installation process with only light drilling required for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind! |
| Description_MKT | Jeeps JL Wrangler model is an impressive overhaul over previous designs, with modern appointments and considerably more power. Put the finishing touch on your new JL with enough clearance to easily run 35x12.50 tires with Rough Countrys 3.5in Suspension Lift! This easy-to-install kit offers a total transformation in the look of your Jeep while maintaining a smooth, factory-like ride. Instantly gain an aggressive look and commanding stance that will truly set your JL apart from the pack!Rough Countrys 3.5in Suspension Lift includes front and rear coil springs with a linear coil rate that promotes incredible handling while retaining more lift height under load than other designs! For an impressive ride quality both on and off-road, this kit also includes Rough Countrys Adjustable Vertex Reservoir shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance. A set of control arm drop brackets allow you to retain the factory arms at the proper geometric angle for great handling and a smooth highway ride. Better still, this kit features sway-bar links, bump stops and a front, adjustable forged track bar which helps keep your axles tame even under demanding off-road action and is easy to adjust on the vehicle.Jeep JL models lifted 3.5" or taller are prone to driveshaft damage at full suspension droop. The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Countrys Stage 2 Kit includes an aftermarket front CV driveshaft to eliminate this issue and allows you to take advantage of the full travel potential of your lifted Jeep JL! Rough Countrys Jeep JL 3.5in kit features an easy installation process with only light drilling required for an easy, no-fuss assembly. |
| Description_SHO | Lift Kit-Suspension |
| Description_SHO | Vertex Kits |
| doors | 4 Door |
| drive | 4WD |
| height | 4.5 |
| Install Time | 4-6 hours |
| installation_time | 4-6 hours |
| last_update | 2023-04-18 14:01:44 |
| length | 33.5 |
| Lift/Drop Height | 3.5 in. |
| lift_height | 3.5 inch |
| max_tire | 35.0 inch |
| prop_65_warning | CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Rear Kit Components | Lifted Coil Springs, Sway Bar Links, Track Bar Bracket, Bump Stops |
| sold_as | Kit |
| Tire & Wheel Size Combinations | 35x12.50 R20 - 20x10, Offset: -18mm |
| Title | 3.5 in Lift Kit - C/A Drop - FR D/S - Vertex - Jeep Wrangler JL Rubicon (18-23) |
| Title | 3.5in Jeep Suspension Lift Kit, Stage 2, Coils & Control Arm Drop (18-20 Wrangler JL Unlimited Rubicon) |
| Universal | No |
| vehicle_type | Jeep |
| WARNING CA Proposition 65 | No |
| Warranty | Lifetime Replacement Warranty |
| weight | 17.5 |
| width | 9.5 |
